WASP
WASP is an Italian manufacturer of 3D printers and extruders for clay, concrete, technical polymers and recycled pellets, ranging from delta desktop machines to on-site construction systems. As an authorized WASP reseller in Oman, Atoms Lab supplies and installs these systems, trains your teams to run them and supports them in service.
Delta WASP 2040 PRO
Fast delta filament printer with a 350 °C all-metal extruder for engineering and abrasive filaments; converts to clay with the WASP Clay Kit.
Delta WASP 2040 Clay
Compact delta printer for porcelain, stoneware and clays, open on three sides and fitted with the screw-driven LDM 3.0 extruder.
WASP 40100 LDM
Industrial ceramic printer for parts up to 1 m tall in clay, stoneware and porcelain; a production version adds continuous material feeding.
WASP 3MT LDM
Large-format printer for concrete, mortars and clay, building parts up to 1 m tall with the LDM XL or XXL 3.0 screw extruder.
WASP 4070 ZX
Industrial dual-extruder filament printer with a heated chamber for technical thermoplastics, on-board camera and auto-levelling.
WASP 4070 FX
Industrial direct-drive printer for 2.85 mm flexible filaments down to 50 Shore A, suited to orthoses and soft functional parts.
WASP 4070 HDP
Industrial printer that prints straight from plastic pellets, including recycled grades, with pneumatic feeding for round-the-clock jobs.
WASP 60100 HDP
Large pellet printer with a 200 °C chamber and 500 °C hotend for high-performance polymers, with HEPA H13 fume extraction.
WASP CUBO HDP
Enclosed cartesian pellet printer with a 1.2 m cube build volume, built to run recycled and impure materials in production.
WASP 3MT HDP
Pellet printer for 1 m objects such as furniture and installations, fed continuously from a 20 L tank and assembled on site.
POWER WASP 45 HDP
Enclosed pellet printer that builds at 45 degrees, producing parts up to 2 m long with fewer supports and less shrinkage.
Crane WASP
Modular crane-style construction printer for building houses on site in concrete, earth or lime; the base module covers 50 m².
Stand-Alone Crane WASP
Single-unit construction printer for research into sustainable building materials and architectural prototypes.
WASP LDM 3.0 Extruder
Screw-driven clay extruder with clean shut-off and retraction, for WASP printers and robotic arms.
WASP LDM XXL 3.0 Extruder
Large stainless-steel screw extruder for concrete, fibre-reinforced mortars and clay at high flow rates.
WASP HDP Extruder
Compact pellet extruder for robotic arms, printing PLA, ABS, PETG, PP and TPU granules with two heating zones.
WASP Continuous Feeding System
Stainless-steel feeder that degasses and pumps clay mixes to the extruder, so long ceramic prints run without refilling a tank.
CEREBRO
Control unit that turns an industrial robotic arm into a 3D printer, driving any WASP LDM or FGF extruder.
WASP PLA Pellet
Neutral bio-based PLA granules for WASP pellet printers, suited to fast printing of complex geometry; colour with masterbatch.
WASP ABS Pellet
Neutral ABS granules for WASP pellet printers, for heat-resistant parts that need gluing or post-processing.
WASP Red Earthenware Clay Mixture
Ready-to-print red earthenware clay body for WASP clay printers and LDM extruders.