Technology we deploy
The systems we specify within our solutions, each delivered with installation, training and local support.
98 items
Form 4
Fast desktop masked-SLA printer built on Low Force Display tech, delivering most prints in under two hours with a large validated resin library.
Form 4L
Large-format LFD resin printer offering 4.6x the build volume of Form 4 for full-size prototypes or batches of production parts.
Form 4B
Healthcare version of Form 4 that prints biocompatible dental and medical resins, for models, surgical guides, appliances and devices.
Form 4BL
Large-format biocompatible resin printer for high-volume dental labs and hospitals needing big batches or large medical parts in a day.
Fuse 1+ 30W
Compact benchtop SLS printer that sinters nylon, TPU and composite powders into strong, support-free functional parts in-house.
Fuse X1
Industrial large-format SLS system with a 61.5 L chamber, built for overnight full-size parts and high-throughput production runs.
Form Wash (V2)
Automated solvent wash station that agitates resin prints clean, then lifts them out to air dry when the cycle finishes.
Form Cure (V2)
Heated 405 nm UV curing chamber that brings resin parts to full strength, curing general purpose resins in about a minute.
Form Wash L (V2)
Large automated wash unit that cleans a full Form 4L platform, or two Form 4 platforms, in one agitated solvent bath.
Form Cure L (V2)
Large-format heated UV curing unit sized for full Form 4L and Form 4BL builds, with fast heat-up and validated material presets.
Fuse Sift
All-in-one SLS powder station for part extraction, powder recovery, storage and automatic mixing of used and fresh powder.
Fuse Blast
Automated media-blasting cabinet that cleans and optionally polishes SLS parts, handling a full build chamber in minutes.
Grey Resin V5
All-round matte grey resin for prototypes, models and fixtures, balancing speed, accuracy and solid mechanical performance.
Clear Resin V5
Colorless, highly transparent resin that can be polished to near-optical clarity for light pipes, fluidics and see-through prototypes.
White Resin V5
Bright white general purpose resin with a matte finish, suited to presentation models and prototypes with fine detail.
Black Resin V5
Deep matte black general purpose resin for stiff, detailed parts with a finish comparable to injection-molded plastic.
Fast Model Resin
Formlabs' quickest-printing resin for Form 4 series, ideal for rapid design iterations and large prototypes in a couple of hours.
Tough 2000 Resin V2
ABS-like engineering resin combining stiffness and toughness for rugged prototypes, jigs and end-use parts that resist cracking.
Rigid 10K Resin
Heavily glass-filled, ultra-stiff resin for molds, jigs and tooling that must hold dimensions under heat and pressure.
Flexible 80A Resin V2
Tear-resistant black elastomer resin that mimics 80A urethanes and hard rubber for grips, gaskets, bumpers and soft inserts.
Silicone 40A Resin
100% silicone printing resin for soft, stretchable, heat- and chemical-resistant parts such as seals, wearables and medical devices.
Precision Model Resin
High-accuracy beige dental model resin for restorative models with crisp margins, printed on Form 4B and Form 4BL.
Surgical Guide Resin
Autoclavable, biocompatible translucent resin for dental implant surgical guides, drill templates and sizing templates.
Nylon 12 Powder (10 kg)
Go-to general purpose SLS nylon for durable, accurate functional prototypes and end-use assemblies with good environmental stability.
Form 4 Resin Tank
Dual-layer flexible film resin tank with reusable lid for Form 4 and Form 4B, making it easy to swap and store materials.
Form 4L Resin Tank
Large-format flexible film resin tank with lid for Form 4L and Form 4BL, letting each material live in its own tank.
Form 4 Build Platform
Spare aluminum build platform for Form 4 and Form 4B, so a new print can start while parts are removed from the last one.
Form 4 Flex Build Platform
Flexible Quick Release build platform that lets you pop parts off in seconds without scrapers, reducing part damage.
UltiMaker S8
UltiMaker's fastest S series dual-extrusion desktop printer, built for high-throughput professional prototyping and production parts.
UltiMaker S8 Pro Bundle
The S8 paired with the Material Station and Air Manager for unattended, multi-spool printing inside a filtered, enclosed chamber.
UltiMaker S7
Dual-extrusion professional printer with a magnetic PEI flex plate and enclosed-ready design for reliable engineering prints.
UltiMaker S6
High-speed dual-extrusion S series printer that supports composites and 300+ materials for professional workflows.
UltiMaker S5
Proven large-format dual-extrusion printer with active bed leveling, a long-time workhorse for engineering teams.
UltiMaker S3
Compact dual-extrusion desktop printer offering S series reliability and material range in a smaller footprint.
UltiMaker Factor 4 Plus
Industrial FDM platform with a heated, filtered chamber and direct-drive dual extrusion for repeatable production parts.
UltiMaker Method XL
Large-format printer with a heated chamber for big ABS and engineering parts, plus built-in HEPA and carbon filtration.
UltiMaker Method X Carbon Fiber
Heated-chamber printer tuned for carbon fiber and engineering composites, aimed at strong, heat-resistant functional parts.
MakerBot Sketch Sprint
Fast single-extruder PLA printer designed for classrooms and makerspaces that need quick, dependable prints.
UltiMaker Material Station
Humidity-controlled filament base that stores and auto-feeds up to six spools for long, unattended S series print runs.
UltiMaker Air Manager
Enclosing top with integrated filtration that captures most ultrafine particles and blocks access to the build area mid-print.
UltiMaker PVA Removal Station (PVARS)
Water-circulating tank that speeds up dissolving PVA and RapidRinse supports compared with a still water bath.
UltiMaker Print Core AA 0.4 mm
Standard swappable S series print core for build materials such as PLA, ABS, PETG, Nylon and PC.
UltiMaker Print Core AA+ 0.4 mm
High-flow quad-chamber print core for fast printing of standard materials on the newest S series printers.
UltiMaker Print Core BB 0.4 mm
Dedicated print core for water-soluble PVA support, used alongside an AA core for complex dual-material parts.
UltiMaker Print Core CC 0.6 mm
Wear-resistant print core for abrasive composite filaments such as PET CF and Nylon CF Slide.
UltiMaker Print Core HT 0.6 mm
High-temperature print core for demanding engineering and composite materials on S series and Factor printers.
UltiMaker PLA (S series)
Easy-printing, accurate PLA for visual prototypes, jigs and gauges, offered in a wide range of colors.
UltiMaker Tough PLA (S series)
Engineering-grade PLA with impact toughness close to ABS, good for functional prototypes and tooling with low warping.
UltiMaker ABS (S series)
Low-warp ABS formulation with consistent layer bonding for durable prototypes and end-use parts.
UltiMaker PETG (S series)
Versatile, tough PETG with chemical and wear resistance, suited to manufacturing aids and functional parts.
UltiMaker Nylon (S series)
PA6/66-based nylon with lower moisture uptake and longer shelf life, for durable, wear-resistant parts.
UltiMaker CPE (S series)
Co-polyester filament combining chemical resistance and dimensional stability for mechanical parts and prototypes.
UltiMaker CPE+ (S series)
Higher-temperature, higher-impact version of CPE for parts that face heat or chemical exposure.
UltiMaker PC (S series)
Polycarbonate filament for stiff, strong parts that must keep their shape at elevated temperatures.
UltiMaker TPU 95A (S series)
Flexible, rubber-like TPU that prints more easily than typical flexibles, with good chemical resistance.
UltiMaker PVA (S series)
Water-soluble support material that dissolves in tap water, enabling complex geometries and internal cavities.
UltiMaker Breakaway (S series)
Peel-off support material that leaves a clean surface, ideal with build materials that don't pair well with PVA.
UltiMaker PET CF (S series)
Carbon-fiber-filled PET for stiff, dimensionally stable prototypes, fixtures and replacement parts.
UltiMaker Nylon CF Slide (S series)
PFAS-free carbon-fiber Nylon 6/12 with low friction and high wear resistance, positioned as a POM alternative.
UltiMaker Nylon 12 Carbon Fiber (Method series)
Stiff, heat-resistant carbon-fiber nylon for Method printers, used for structural parts and metal replacement.
VOLTER L1616
Large-format 3-axis L Series router with a 1,610 x 1,610 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L2016
Large-format 3-axis L Series router with a 2,200 x 1,610 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L3016
Large-format 3-axis L Series router with a 3,200 x 1,610 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L3020
Large-format 3-axis L Series router with a 3,200 x 2,150 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L4016
Large-format 3-axis L Series router with a 4,200 x 1,610 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L4020
Large-format 3-axis L Series router with a 4,200 x 2,150 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L6016
Large-format 3-axis L Series router with a 6,200 x 1,610 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L6020
Large-format 3-axis L Series router with a 6,200 x 2,150 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER L8020
Large-format 3-axis L Series router with a 8,200 x 2,150 mm bed, servo drives and vacuum hold-down for signage, plastics, wood and metal work.
VOLTER SX
Compact router with a 1,020 x 1,200 mm bed and ball-screw drives on every axis, suited to smaller shops and precise part work.
VOLTER ACP3016
ACP Series router tailored to cutting aluminium composite panels and aluminium sheet, with a 3,200 x 1,610 mm working area.
VOLTER ACP3020
ACP Series router tailored to cutting aluminium composite panels and aluminium sheet, with a 3,200 x 2,150 mm working area.
VOLTER ACP4016
ACP Series router tailored to cutting aluminium composite panels and aluminium sheet, with a 4,200 x 1,610 mm working area.
VOLTER ACP4020
ACP Series router tailored to cutting aluminium composite panels and aluminium sheet, with a 4,200 x 2,150 mm working area.
VOLTER ACP6016
ACP Series router tailored to cutting aluminium composite panels and aluminium sheet, with a 6,200 x 1,610 mm working area.
VOLTER ACP6020
ACP Series router tailored to cutting aluminium composite panels and aluminium sheet, with a 6,200 x 2,150 mm working area.
VOLTER XPro2016
Heavy-duty PRO Series router for high-load production, pairing a 2,200 x 1,600 mm bed with 10-16 kW spindles and 800 mm/s rapids.
VOLTER XPro3016
Heavy-duty PRO Series router for high-load production, pairing a 3,200 x 1,600 mm bed with 10-16 kW spindles and 800 mm/s rapids.
VOLTER XPro3020
Heavy-duty PRO Series router for high-load production, pairing a 3,200 x 2,100 mm bed with 10-16 kW spindles and 800 mm/s rapids.
VOLTER XPro4020
Heavy-duty PRO Series router for high-load production, pairing a 4,200 x 2,100 mm bed with 10-16 kW spindles and 800 mm/s rapids.
Automatic Tool Changer (7 positions)
Swaps cutters automatically mid-job and re-measures tool length after each change, cutting setup time on multi-tool jobs.
Vacuum Table
Zoned vacuum hold-down bed that clamps sheet material flat without mechanical fixtures; standard on VOLTER routers.
Phenolic Vacuum Table
Upgraded vacuum bed with a replaceable top layer for stronger hold-down of plastics, acrylic, composites and leather.
Automatic Vacuum Zone Switching
Lets the controller switch vacuum zones automatically, so suction is focused where the material sits.
Tangential Knife
Self-rotating blade head for knife-cutting soft sheet goods such as plastics, leather, fabric and corrugated board.
IP Camera Registration System
Camera that reads printed registration marks to contour-cut printed graphics and correct for print distortion.
Pneumatic Locator Pins (PLP) System
Pop-up pneumatic pins that give a fast, repeatable reference edge when loading sheets onto the bed.
HITECO Spindles 4.5-16 kW
Italian HITECO spindle range, air-cooled at lower power and liquid-cooled at higher power, selected per application.
Extended Z-Axis Clearance
Raised gantry option for routing thicker stock than the standard portal height allows.
Tool Lubricator
Metered coolant system delivering emulsion or oil mist to the cutter, useful when machining aluminium.
Probe Sensor
Touch probe that automates part positioning, hole-centre finding and surface height measurement.
Threading
Adds thread-cutting capability so the router can produce threaded holes in machined parts.
Safety Light-Beam Sensors (2 sides)
Light-beam guarding on two sides that pauses the machine when a beam is interrupted.
VECTRIC VCarve Pro Software
Design and toolpath software for preparing 2D and 3D jobs, with broad file-format import.
7.5 kW Vacuum Blower
Vortex blower that powers the vacuum hold-down, supplied with filter, gauge and safety valve.
Vacuum Pump BUSCH MINK 5 kW
German-made rotary vacuum pump from Busch offering steady suction for demanding hold-down jobs.
Dust Collector Italy Vacuum 48TB 3 kW
Industrial chip and dust extractor from Italy Vacuum that connects to the router's brush foot.
Dust Collector Italy Vacuum 48TB 4 kW
Higher-power version of the Italy Vacuum 48TB extractor for larger beds and heavier chip loads.